Spendor loudspeakers

Highly regarded UK company Spendor speakers are known for their refinement, natural midrange, rhythmic timing, and overall musicality

Spendor's latest technically advanced yet wholly musically satisfying D7.2 loudspeaker is another Spendor speaker that reviewers like to write about. Improvements in many aspects of the D-line speakers, including cabinet and driver design, has further refined integration of the drivers and delivers greater transparency. The linear pressure zone (LPZ) tweeter that better tracks leading edge transients has been retained because of its proven track record of offering better clarity of lyrics, and high frequency tones that are purely pitched, smooth and delicate rather than splashy and hard. This is perfectly integrated with a clean midrange and a well proportioned tight bass.

Listen to the sound of a well recorded saxophone on the D7.2, and especially the D9.2, and the embouchure technique, mouth piece/reed and body of the instrument resonances are rendered before you to appreciate that other speakers simply don't track well enough to be recognized in listening. Similarly there is an extra level of information revealed in vocals along the lines of how we can tell if a person has a cold or not. It's this extra level of scrutiny that Spendor engineers have aimed for in the D-line speakers that fully justifies their price and the requirement for high quality source and amplification equipment.

Spendor has always been associated with reference standard domestic and studio monitor loudspeakers since the sixties. The company's founder Spencer Hughes was involved with the development new materials such as Bextrene while working for the BBC that outperformed the paper cones of the day. After gaining the contract to provide the BBC with reference-standard, monitor-quality speakers such as the Spendor LS3/5 and BC1, domestic versions were made available to the consumer market and achieved cult status.

This legacy is continued not only with the D-line speakers but also with the more affordable A-line.

Spendor's A-line speakers are easy to drive and designed to get the best musical performance out of less ambitious broadly mid-level amplifiers and source component based systems in a clean line unobtrusive visual aesthetic. Careful management of the bass and seamless integration of the treble provides for a very coherent sound and helps the speakers disappear. The BBC always considered the midrange to be crucial for good sound reproduction since the ear is most sensitive to this part of the frequency spectrum.

The range includes the popular A4 and A7 speakers, the latter of which features the fifth generation flow port trickled down from the more expensive D-line speakers. In smaller rooms, with complex mode patterns, and where the speakers may need to be located close to a wall, the flow port design offers a more even bass than can usually be achieved with typical reflex loaded designs.

Spendor Quality

The loudspeaker cabinets are built in-house at Spendor's own UK dedicated cabinet manufacturing facility that also supplies cabinets to other loudspeaker manufacturers. Fit and finish is beyond reproach, as are the entirely Spendor made matched bass and midrange drivers and cross-overs with custom components. The unseen cross-over board is critical for a loudspeaker to faithfully track frequencies across a wide bandwidth at low to high acoustical output levels while preserving the relative contribution harmonic and sub-harmonic amplitude and phase frequency components. Cross-over optimizition is more successful when the driver electrical/acoustical parameters are fully in the hands of Spendor's experienced designers. Well-practiced product development, and modern manufacturing methods will greatly assist the creation of good sounding speakers. But it is also the passion, experience, subjective listening, and attention to details down to the torque of a driver mounting bolt, that makes great sounding speakers able portray the natural timbre of instruments and voices, and the essential aspects of rhythm and timing.

There are many speaker manufacturers offering good quantity of sound for the money that will certainly stimulate the senses, but if your quest is for sound more on the fidelity end of the spectrum without comprising the entertainment factor, then the Spendors are worth checking out and there are many reviews that will help you with this.

With the A-line and D-line ranges of speakers Spendor has kept up with ever improving high definition digital and analog sound sources but always while delivering a natural non-fatiguing presentation that is neither 'impressively' bright or 'impressively' balanced. With the right choice of speaker for the room, they will give long term satisfaction.


 
Spendor loudspeakers

Spendor A1 Loudspeakers

  • 2-way shelf mount speaker
  • Calibrated and matched to Broadcast reference standard
  • Drivers: 1 x 5.9" ep77 Bass/Mid, 0.87" wide-surround tweeter
  • Nominal Impedance 8Ω
  • Crossover frequency 4.2KHz, single wired
  • Typical in room response: 55Hz-25KHz
  • Sensitivity: 84 dB
  • Recomended Amplifier: 25-100 watts
  • 12.1" x 6.5" x 7.3" (HWD), weight: 11.0 lbs
  • Black Ash, Dark Walnut and Natural Oak finishes
  • Grilles available as a cost option
  •  

Spendor A2 Loudspeakers

  • 2-way compact floor standing
  • Calibrated and matched to Broadcast reference standard
  • Drivers: 5.9" ep77 Bass/Mid, 0.87" wide-surround tweeter
  • Nominal Impedance 8Ω
  • Crossover frequency: 4.2kHz, single wired
  • Typical in room response: 36Hz-25KHz
  • Sensitivity: 85 dB
  • Recomended Amplifier: 25-125 watts
  • 30.9" x 5.9" x 10.2" (HWD), weight: 26.5 lbs
  • Black Ash, Dark Walnut and Natural Oak finishes
  • Grilles available as a cost option
  •  

Spendor A4 Loudspeakers

  • 2-way floor standing
  • Calibrated and matched to Broadcast reference standard
  • Drivers: 7" ep77 polymer Bass/Mid, 0.87" wide-surround tweeter
  • Nominal Impedance: 8Ω
  • Crossover frequency: 3.7KHz, single wired
  • Typical in room response: 32Hz-25KHz
  • Sensitivity: 86 dB
  • Recomended Amplifier: 25-150 watts
  • 33.9" x 6.5" x 11.2" (HWD), weight: 35.3 lbs
  • Black Ash, Dark Walnut and Natural Oak finishes
  • Grilles available as a cost option
  •  

Spendor A7 Loudspeakers

  • 2-way floor standing with linear flow port and dynamic damping
  • Calibrated and matched to Broadcast reference standard
  • Drivers: 7" ep77 polymer Bass/Mid, 0.87" wide-surround tweeter
  • Nominal Impedance: 8Ω
  • Crossover frequency: 3.7kHz, single wired
  • Typical in room response: 32Hz-25KHz
  • Sensitivity: 88 dB
  • Recomended Amplifier: 25-200 watts
  • 36.8" x 7.1" x 12.0" (HWD), weight: 39.7 lbs
  • Black Ash, Dark Walnut and Natural Oak finishes
  • Grilles available as a cost option
  •  

New Spendor D7.2 Loudspeakers

  • 2.5-way floor standing with fifth generation linear flow port and dynamic damping
  • Calibrated and matched to Broadcast reference standard
  • Drivers: 7" ep77 polymer Mid/Bass driver,
    7" kevlar composite polymer bass driver,
    22mm LPZ fluid cooled tweeter
  • Nominal Impedance: 8Ω
  • Sensitivity: 90 dB
  • Crossover frequencies: 900Hz and 3.2KHz, single wired
  • Typical in room frequency response: 29Hz-25KHz
  • Recomended Amplifier: 25-200 watts
  • 38.6" x 7.6" x 13.1" (HWD), weight: 46.3 lbs
  • Black Ash, Dark Walnut and Cherry finishes
  • Magnetically attached grilles provided as standard
  •  

Spendor D9.2 Loudspeakers

  • 3-way floor stander with fifth generation linear flow port and dynamic damping
  • Calibrated and matched to Broadcast reference standard
  • Drviers: 7" ep77 polymer Mid driver,
    2 x 7" kevlar composite polymer bass drivers,
    22mm LPZ fluid cooled tweeter
  • Nominal Impedance: 8Ω Sensitivity: 90 dB
  • Crossover frequencies: 500Hz and 4.2KHz, single wired
  • Typical in room frequency response: 27Hz-25KHz
  • Recomended Amplifier: 25-250 watts
  • 45.5" x 8.3" x 15.7" (HWD), weight: 77.2 lbs
  • Black Ash, Dark Walnut and Cherry finishes
  • Magnetically attached grilles provided as standard
  •  

New Spendor Classic 4.5 Loudspeakers

  • 2-way sealed-box design for easy placement
  • Drivers: 1 x 5.9 bass/mid, 0.87" wide-surround tweeter
  • Nominal Impedance: 8Ω
  • Crossover frequency: 4.2kHz, Bi-wired
  • Frequency response: 55Hz-25kHz
  • Sensitivity: 84 dB
  • Recomended Amplifier: 25-100 watts
  • 12.0" x 7.0" x 6.0" (HWD), weight: 11.0 lbs
  • Specially engineered matching stand available
  • Walnut or Cherry furniture grade real wood veneer
  •  

New Spendor Classic 3.1 Loudspeakers

  • 2-way Reflex loaded stand-mount speaker
  • Drivers: 1 x 7.1 bass/mid, 0.87" wide-surround tweeter
  • Nominal Impedance: 8Ω
  • Crossover frequency: 3.7kHz, Bi-wired
  • Frequency response: 40Hz-25kHz
  • Sensitivity: 88 dB
  • Recomended Amplifier: 25-150 watts
  • 16.0" x 9.0" x 11.0" (HWD), weight: 22.0 lbs
  • Specially engineered matching stand available
  • Walnut or Cherry furniture grade real wood veneer
  •  

New Spendor Classic 2.3 Loudspeakers

  • 2-way Reflex loaded stand-mount speaker
  • Drivers: 1 x 8.3 bass/mid, 0.87" wide-surround tweeter
  • Nominal Impedance: 8Ω
  • Crossover frequency: 3.6kHz, Bi-wired
  • Frequency response: 35Hz-25kHz
  • Sensitivity: 88 dB
  • Recomended Amplifier: 25-200 watts
  • 21.0" x 11.0" x 13.0" (HWD), weight: 33.1 lbs
  • Specially engineered matching stand available
  • Walnut or Cherry furniture grade real wood veneer
  •  

New Spendor Classic 1.2 Loudspeakers

  • 3-way Reflex loaded stand-mount speaker
  • Drivers: 1 x 8.3 bass, 5.9" mid, 0.87" wide-surround tweeter
  • Nominal Impedance: 8Ω
  • Crossover frequency: 415Hz, 2.7kHz, Tri-wired
  • Frequency response: 30Hz-25kHz
  • Sensitivity: 87 dB
  • Recomended Amplifier: 25-200 watts
  • 24.0" x 12.0" x 15.0" (HWD), weight: 48.5 lbs
  • Specially engineered matching stand available
  • Walnut or Cherry furniture grade real wood veneer
  •  

New Spendor Classic 100 Loudspeakers

  • 3-way Reflex loaded stand-mount speaker
  • Drivers: 1 x 12.2 bass, 7.1" mid, 0.87" wide-surround tweeter
  • Nominal Impedance: 8Ω
  • Crossover frequency: 490Hz, 3.6kHz, Tri-wired
  • Frequency response: 25Hz-25kHz
  • Sensitivity: 89 dB
  • Recomended Amplifier: 25-250 watts
  • 28.0" x 15.0" x 17.0" (HWD), weight: 79.4 lbs
  • Specially engineered matching stand available
  • Walnut or Cherry furniture grade real wood veneer
  •  

New Spendor Classic 200 Loudspeakers

  • 3-way sealed box floor standing speaker
  • Drivers: 2 x 12.2 bass, 7.1" mid, 0.87" wide-surround tweeter
  • Nominal Impedance: 8Ω
  • Crossover frequency: 550Hz, 3.8kHz, Tri-wired
  • Frequency response: 20Hz-25kHz
  • Sensitivity: 89 dB
  • Recomended Amplifier: 25-300 watts
  • 44.0" x 14.0" x 20.0" (HWD), weight: 121.3 lbs
  • Specially engineered matching stand available
  • Walnut or Cherry furniture grade real wood veneer
  •  

A Series

A1
A2
A4
A7

D Series

D7.2
D9.2

Classic Series

New Classic 4.5
New Classic 3.1
New Classic 2.3
New Classic 1.2
New Classic 100
New Classic 200